 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CXA3002N TX Gain Control Amplifier Description CXA3002N is a TX gain control amplifier for CDMA cellular mobile phone. Features * Wide gain control range * Linear gain slope * High output IP3 Typ. +9dBm at Gain = 35dB * Power save function included Absolute Maximum Ratings * Supply voltage * Operating temperature * Storage temperature * Allowable power dissipation * Supply voltage range * Logic input voltage * Signal input voltage * Differential signal input voltage Operating Conditions Supply voltage Applications * CDMA cellular mobile phone * CDMA & AMPS cellular phone Structure Bipolar sillicon monolithic IC 24 pin SSOP (Plastic) VCC Topr Tstg PD 6 -40 to +85 -65 to +150 420 -0.3 to 6 -0.3 to VCC +0.3 -0.3 to VCC +0.3 0 to 2.5 V C C mW V V V V 3.1 to 3.8 V Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. -1- E95712-PP CXA3002N Block Diagram IF Input CDMAIN CDMAINX OUT OUTX IF Output BP1 to External Capacitor BP2 Gain Control GCTL Supply Voltage VCC1, 2 Bias Driver Ground GND1, 2 CXA3002N Power Save PSV -2- CXA3002N Pin Configuration N.C. 1 24 PSV VCC1 2 23 GCTL GND1 3 22 N.C. N.C. 4 21 N.C. CDMAIN 5 20 N.C. N.C. 6 CXA3002N CDMAINX 7 19 OUTX 18 N.C. N.C. 8 17 OUT N.C. 9 16 N.C. N.C. 10 15 VCC2 N.C. 11 14 GND2 BP1 12 13 BP2 -3- CXA3002N Pin Description Pin No. 1 2 3 4 Symbol N.C. VCC1 GND1 N.C. 3.6 0 Pin voltage Typ. (V) Equivalent circuit Description No connection. Positive power supply. Ground. No connection. 5 CDMAIN 1.9 VCC1 Differential input pin for CDMA transmit IF signal. 7 CDMAINX 1.9 6k 6k 6 8 9 10 11 GND1 N.C. 13 3k 20k 20k 12 3k No connection. 12 BP1 1.9 Connected to GND with capacitor 0.01F. 5 7 13 BP2 1.9 14 15 GND2 VCC2 0 3.6 19 Ground for output stage. Positive power supply for output stage. 17 VCC2 17 OUT 200 4k 4k 200 Differential output pins for transmit IF signal. Open collector output. 19 OUTX GND2 -4- CXA3002N Pin No. 16 18 20 21 22 Symbol Pin voltage Typ. (V) Equivalent circuit Description N.C. No connection. VCC1 8k 8k 23 GCTL 23 Gain control pin with a ripple filter. 6k 6k GND1 VCC1 24 PSV 24 Power save function pin. High: Active Low: Power save GND1 -5- CXA3002N Electrical Characteristics DC characteristics Parameter Current Consumption 1 Current Consumption 2 Current Consumption 3 Current Consumption 4 Current Consumption 5 Current Consumption 6 Current Consumption 7 Current Consumption 8 Current Consumption 9 Input current pin 23H Input current pin 23L Input current pin 24H Input current pin 24L PSV high voltage PSV low voltage Symbol ICC1 ICC2 ICC3 ICC4 ICC5 ICC6 ICC7 ICC8 ICC9 IGCTL H IGCTL L IPSVH IPSVL VPSH VPSL Conditions Gain = MAX., Pin 2 Gain = MAX., Pin 15 Gain = MAX., Pin 17 + Pin 19 Gain = MIN., Pin 2 Gain = MIN., Pin15 Gain = MIN., Pin 17 + Pin 19 VPSV = 0.5V, Pin 2 VPSV = 0.5V, Pin 15 VPSV = 0.5V, Pin 17 + Pin 19 VGCTL = 3V VGCTL = 0.5V VPSV = 3V VPSV = 0.5V Pin 24 -10 3 0.5 V -10 10 Min. 4.1 3.2 5 4.2 8.0 0.2 (VCC = 3.6V, Ta = 25C) Typ. 5.7 4.4 7 5.8 11.1 0.3 Max. 7.3 5.6 9 7.4 14.2 0.4 1 1 1 10 A mA Unit AC characteristics Parameter Symbol Conditions Min. 10 VGCTL = 2.7V VGCTL = 1.5V VGCTL = 0.3V VGCTL = 1 to 2V G = 35dB F1 = 131.38MHz F2 = 132.38MHz Measure to 130.38MHz G = 35dB Used 1MHz BPF Measure to 130.38MHz 58 38.5 -10 (VCC = 3.6V, Ta = 25C) Typ. Max. 200 42.5 -5 -58 61 0 -52 64 dB/V dB Unit MHz Operating frequency range FR Gain MAX. Gain center Gain MIN. Gain slope Input level 3rd order intercept point G2.7 G1.5 G0.3 GCLIN IIP3 -30 -26 dBm Noise Figure NF 10 14 dB Adjust GCTL voltage, and set the overall gain to 35dB. -6- CXA3002N Measurement Circuit V24 1 N.C. V2 A2 PSV 24 A24 1k 0.01 2 VCC1 GCTL 23 0.01 A23 V23 3 GND1 N.C. 22 10k V5 4 N.C. N.C. 21 V17 + 19 1:3 CDMA INPUT 560n 1000p 1000p 1k 5 CDMAIN N.C. 20 A17 + 19 6 N.C. OUTX 19 OUTPUT 7 CDMAINX V7 N.C. 18 430n 2.2k 10k 8 N.C. OUT 17 9:2 9 N.C. N.C. 16 0.01 V15 A15 10 N.C. VCC2 15 11 N.C. 0.01 12 BP1 V12 GND2 14 0.01 BP2 13 V13 1k 1k -7- CXA3002N Application Circuit 1 0.1 0.1 Active Sleep VCC 0.01 1 2 3 24 23 22 21 20 19 CXA3002 18 17 16 15 14 13 0.01 0.01 1k Gain Control 0.01 1000p TX IF INPUT 1000p 4 5 6 7 8 9 10 0.01 11 12 1000p Bandpass Filter TX IF OUTPUT 1000p Must be adjusting values to result a best impedance matching between BPF filter and this IC. Application circuits shown are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits or for any infringement of third party patent and other right due to same. -8- CXA3002N Design Reference Values Single ended measurement Item Input resistance Input capacitance Output resistance Output capacitance Symbol RIN CIN ROUT COUT f = 130.38MHz, VGCTL = 1.5V Conditions (VCC = 3.6V, Ta = 25C) Typ. 1.9 4 1.6 5 Unit k pF k pF Notes on Operation 1) This IC is a wideband amplifier with wide gain control range. Separate Pin 3 (GND1) and Pin 14 (GND2) to prevent interference between input and output. Furthermore, the decoupling capacitors between Pins 2 and 3, Pins 14 and 15 should be as close to the IC as possible. 2) This IC assumes the excellent characteristics when the differential input impedance between Pins 5 and 7 is 500, and the differential output impedance between Pins 17 and 19 is 1k. Refer to the Measurement Circuit for the external element settings, etc. 3) Connect the capacitors, which are connected to Pins 12 and 13, to Pin 14 (GND2). 4) Pay attention to handling this IC because its electrostatic discharge strength is weak. -9- CXA3002N Sensitivity 60 VCC = 3.6V 40 20 Power gain [dB] 0 -20 -40 T = -40deg T = 25deg T = 85deg -60 0 0.5 1 1.5 2 2.5 3 3.5 VGCTL [V] IIP3 0 VCC = 3.6V -10 -20 IIP3 [dBm] -30 -40 T = -40deg T = 25deg T = 85deg -40 -20 0 Power gain [dB] 20 40 60 -50 -60 -60 - 10 - CXA3002N Noise Figure 50 VCC = 3.6V 40 T = -40deg T = 25deg T = 85deg Noise figure [dB] 30 20 10 0 -60 -40 -20 0 Power gain [dB] 20 40 60 Gain Error from Room Temp. 6 VCC = 3.6V 4 T = -40deg T = 85deg 2 Gain error [dB] 0 -2 -4 -6 -60 -40 -20 0 Power gain [dB] 20 40 60 - 11 - CXA3002N Package Outline Unit: mm 24PIN SSOP(PLASTIC) + 0.2 1.25 - 0.1 7.8 0.1 0.1 13 24 A 1 + 0.1 0.22 - 0.05 12 + 0.05 0.15 - 0.02 0.65 0.1 0.1 0.13 M 5.6 0.1 0 to 10 NOTE: "" Dimensions do not include mold protrusion. DETAIL A PACKAGE STRUCTURE PACKAGE MATERIAL SONY CODE EIAJ CODE JEDEC CODE SSOP-24P-L01 SSOP024-P-0056 LEAD TREATMENT LEAD MATERIAL PACKAGE WEIGHT EPOXY RESIN SOLDER/PALLADIUM PLATING 42/COPPER ALLOY 0.1g - 12 - 0.5 0.2 7.6 0.2 |
Price & Availability of CXA3002N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |